Language
English 繁體中文

HK-LH1000(A)


  • Table sizes 1000 x 1000mm

  • X, Y, Z-axis travel 1500 x 1100 x 1100mm

  • Rapid traverse rates on X, Y, Z-axis 24/30 m/min

  • Traveling column

  • Twin swing type automatic pallet change (optional)

  • B-axis indexing degree 0.001° (1° optional)

  • Fully enclosed splash guard

  • Max. table load 2200kg (single pallet)

  1. Inquiry
  2. HK-LH Series HMC (2025)
  1. Back to List
  2. Prev

Product Specification

Machine Specifications

MODEL UNIT HK-LH-1000(A)
TABLE Table sizes mm 1000 x 1000
Max. table load kg 2000 x 2
Table height from floor mm 1300
Max. workpiece sizes (dia. x height) mm Ø1650 x H1400
Least indexing degree on B-axis deg 0.001°
SPINDLE Spindle nose taper 7/24 Taper No. 50
Max. spindle speed – direct drive / built-in rpm 8000 (10000)
Max. spindle speed – gear drive rpm 4000 / 6000
TRAVEL X, Y, Z-axis travel mm 1500 x 1100 x 1100
Dist. from spindle center to table surface mm 50-1150
Dist. from spindle nose to table surface mm 250 (150)-1350 (1250)
FEED Rapid traverse rates on X, Y, Z-axis mm/min 24 / 24 / 24 (30 / 30 / 30)
Cutting feed rate m/min 1-20000
ATC Tool shank type BT-50 (BBT-50)
Tool loading capacity pc 40(60)(90)(120)
Max. tool diameter mm Ø125
Max. tool diameter (without adjacent tool) mm Ø250 (Ø450)
Max. tool length mm 550
Max. tool weight kg 25
MOTOR Spindle motor kW 15 / 18.5 (18.5 / 22)(22 / 26)
Servomotors on X, Y, Z-axis kW 6 / 6 / 6
MACHINE DIMENSIONS Width x depth x height mm 5465 x 7930 x 3960
Weight (with single pallet) kg 26800
Weight (with twin pallets) kg 30200
CONTROLLER Fanuc Oi-MF Plus / 3li-MB

Standard / Optional Equipment

STANDARD OPTIONAL
SPINDLE 4000 / 6000 rpm large torque spindle ●
10000 rpm built-in type spindle ●
10000 rpm direct-drive spindle ●
B-AXIS 0.001° Indexing table (B-axis encoder is optional) ●
1° Indexing table ●
TOOL SHANK BT50 ●
HSK-A100 ●
DIN50 ●
CAT50 ●
DEGREE OF BT50 PULL STUD MAS407 BTI (45°) ●
MAS407 BTII (60°) ●
MAS407 BTIII (90°) ●
PUMP OF COOLANT THROUGH MACHINE 20 bar ●
40 bar ●
70 bar ●
MAGAZINE LOADING CAPACITY 40pc ●
60pc ●
90pc ●
120pc ●
COOLING SYSTEM Spindle cooling system ●
Air conditioner for electric cabinet ●
Hydraulic oil temperature control system ●
Cutting fluid temperature control system ●
AUTO PALLET CHANGE Single table ●
Twin tables ●
PPL system ●
CHIP REMOVAL IN MACHINE Twin chip augers ●
CHIP CONVEYOR Chain type chip conveyor ●
Magnetic scraper type chip conveyor ●
Scraper type chip conveyor ●
Roller type chip conveyor ●
Integrated type chip conveyor ●
LUBRICATION OIL SYSTEM General lubrication oil system ●
LHL grease lubrication system (grease) ●
3 AXES LINEAR SCALES 5 μm class ●
3 μm class ●
JIG LUB. / COMP. AIR SUPPLY Overarm supply 6 ports at each side (max. hyd. pressure 120 bar). Oil inlet through patio. ●
Table type 6 oil ports on APC (max. hyd. pressure 120 bar). Oil inlet through bottom. ●
TOOL MEASURING SYSTEM Tool breakage detection (mounted at the magazine side for detecting) ●
Renishaw TW-27R retract contact type sensor (mounted in the machine, the device is suitable for detecting tool length, tool breakage, and tool diameter). ●
CONTROLLER FANUC Oi-MF Plus ●
FANUC 31i-MB ●
OTHER EQUIPMENT Air gun ●
Coolant gun ●
Oil fluid separator ●
OMP60 / RMP60 workpiece measuring system ●
Air blast for machining ●
Oil mist collector ●

Video

Product Description

OPTIMIZED STRUCTURE DESIGN

A Perfect presentation of Structural Rigidity and Dynamic Stability

  • Box type structure design combined with internal ribbing to achieve outstanding rigidity and deformation free performance.
  • One-piece fabricated base provides a solid support for the entire machine.
  • Traveling column structure effectively enhances operation efficiency.
  • Linear guideways are deployed on the step structure of X-axis for higher cutting stability.
  • X, Y, Z-axes are all mounted with roller type linear guideways with outstanding heavy loading capacity.
  • Chip augers are equipped at both sides of the base, allowing for the removal of chips immediately to fast travel, as well as stable and smooth vertical movement.
  • Chip augers are equipped at both sides of the base, allowing for the removal of chips immediately during machining.

TWIN CHIP AUGERS

  • There is one each of chip auger mounted at the right and left side of the base, which can deliver chips generated during cutting to the chip conveyor at the back side of the machine.
  • The chip augers can prevent thermal effects that occur due to chip accumulation and keep the machine interior clean at all times.

MACHINE STRUCTURE OF HK-LH-800 (A)

  • The massive base and robust column combined with internal ribbing ensure lifetime deformation free performance, while exhibiting outstanding rigidity and stability.

Product Feature

 A  ROLLER TYPE LINEAR WAYS ON THREE AXES

The X, Y, and Z-axes are all mounted with heavy-duty linear ways, with a great span between the ways, resulting in high rigidity, low friction coefficient, and outstanding dampening capability.

 B  HIGHLY RIGID COLUMN

The column is a box type double wall structure, preventing deformation even after years of use.

 C  TRAVELING COLUMN

The column moves smoothly and helps to increase the operation efficiency of the machine.

 D  ONE-PIECE FABRICATED BASE

The H-shaped base is one-piece fabricated, providing solid support for the entire machine.

 E  STEP LAYOUT OF LINEAR WAYS

The column moves on linear guideways with step layout, enhancing cutting stability.

 F  DOUBLE AIR CYLINDERS
COUNTERBALANCE ON Y-AXIS

Y-axis vertical movement is counterbalanced by the use of two air cylinders with fast response on axial direction change. Thus, smooth and stable vertical movement can be achieved.

Model HK-LH1000(A)
X 900
Y 750
Z 900
Unit: mm

Related Products