LV-1577BC
Product Specification
| MODEL | UNIT | 1577BC | |
|---|---|---|---|
| ROTARY TABLE | C-axis Working Table Diameter | mm | Ø630 |
| C-axis T-slot | mm | 18 | |
| C-axis Rotary angle | deg. | -360 ~ +360 | |
| Max. rotating speed of C-axis | min-1 | 50 (ST) / 200 (0P) / 600 (0P) | |
| 8-axis Rotary angle | deg. | -55 ~ +120 | |
| B-axis Max. speed | min-1 | 16.6 | |
| Indexing accuracy / repeatability | sec. | 10" / 4" | |
| TABLE | Table size | mm | 1600 X 700 |
| T-slot / T x W x D | mm | 5 X 18 X 125 | |
| Max. table loading | kg | 2000 | |
| C-axis Max. Table Loading | kg | 1000 | |
| 3 AXES TRAVEL | X-axis travel | mm | 1600 |
| Y-axis travel | mm | 710 | |
| Z-axis travel | mm | 750 | |
| SPINDLE | Distance of spindle (90 / 135 degree) to table surface | mm | 50 ~ 760 |
| Spindle nose taper | BBT40(ST), HSK-A63(0P) | ||
| Pull stud of spindle | BT(ST), DIN(OP), HSK(OP), MAS BT(OP) | ||
| Max. spindle speed | rpm | 12000 (ST) , 15000 (0P) , 20000 (0P) | |
| SPINDLE / SERVOMOTORS | Spindle transmission | Bu lit-in | |
| 3 axes (X / Y / Z) rapid traverse rates | M/min | 20 / 20 / 20 | |
| Max. feed rate of cutting | mm/min | 15000 | |
| 3 AXES SPECIFICATIONS | 3 axes (X / Y / Z) linear ways | mm | 55 / 55 / 55 (6 Block) |
| Linear ways type | Roller linear ways (Schneeberqer / P class) | ||
| 3-axis transmission | Ball screws tranmission C3 class | ||
| Ball screw cooling | Cooling throuqh ball screw | ||
| ATC (AUTO TOOL CHANGER) | Tool loading capacity | 40T (ST) / 60T (OP) | |
| Max. tool diameter | mm | #40 - Ø75 | |
| Max. tool diameter (without adjacent tool) | #40-Ø125 | ||
| Max. tool weight | kg | #40-7 | |
| Max. tool lenth | mm | #40-300 | |
| OTHERS (Below data are obtained when the machine is under well air conditioned and stable operating conditions) | Chip removal method | V sharp dual chip auqers | |
| Positioning accuracy / Repeatability | mm | 0.008 / 0.006 | |
| Power source required | KVA | 45 | |
| Air source required | Mpa | 0.65 + 10% | |
| Machine weight | kg | 19000 | |
*The series of machines can be equipped with 5 axes or 4 axes simultaneous controller (Fanuc. Siemens, Heidenhain)
*As the machine manufacturer continuously conducts research and innovation on the machine structure and specifications, the above specifications are subject to change without prior notice.
Related Products
-
HK-LV-255U(L)/HK-LV-320U(L)/HK-LV410U(L)
-
TVML-308
