Language
English 繁體中文

TVML-508

  1. Inquiry
  2. HEAKE TMVL Series 5-axis Traveling Machining Center (2025)
  1. Back to List
  2. Prev
  3. Next

Product Specification

Machine Dimensions

A B C D E
7800 9680 4385 5060 3400

Processing Range

Model A B C D E F
TVML-508 5000 5200 800 800 850 630

Table

Model A B C N D E F G H I
TVML-508 5000 850 50 6 125 18 30 30 12 630

Machine Specifications

Model Unit TVML-508
Rotary Table C-axis rotary table size mm ∅630
T-slot mm 18
Degree of C-axis deg. -360~+360
Max. rotating speed of C-axis min-1 50 / 200 (OP) / 600 (OP)
C-axis max. table loading kg 500
C-axis clamping method / pressure Mpa Hydraulic / 3~3.5
Indexing accuracy / repeatability sec. 10" / 4"
B-Axis Degree of B-axis deg. ±120
Max. rotating speed of B-axis min-1 16.6
B-axis clamping method / pressure Mpa Hydraulic / 2~2.4
Indexing accuracy / repeatability sec. 10" / 4"
Table Table size mm 5000 x 850
T-slot / T x W x D mm 5 x 18 x 125
Max. table loading kg 7000
3-Axis Travel X-axis travel mm 5200
Y-axis travel mm 800
Z-axis travel mm 800、1000 (OP)
Spindle Dist. from spindle to table surface (horizontal) mm 80~880、80~1080 (OP)
Spindle nose taper   #40、#50 (OP)
Pull stud of spindle   BBT、DIN (OP)、HSK (OP)、MAS BT (OP)、CAT (OP)
Max. spindle speed rpm 12000、15000 (OP)、20000 (OP)
Spindle / Servo Motors Spindle motor kw Siemens / Heidenhain controller: 7.5 / 22 kw　Fanuc controller 15 / 26 kw
Spindle transmission   Built-in
3-axis (X/Y/Z) rapid traverse rates M/min 20 / 30 / 30
Max. feed rate of cutting mm/min 15000
3-Axis
Specifications		 3-axis (X/Y/Z) linear ways   55 / 55 / 55 (6 x Black)
Linear ways type   Roller linear ways
3-axis transmission (X/Y/Z)   X: Rack / Y: Ball screws / Z: Ball screws
Ball screw cooling oil L G68 / 8L / Grease / 1L (OP)
ATC (Auto Tool Changer) Tool loading capacity   40T / 60T (OP)
Max. tool diameter mm #40-∅75、#50-∅125 (OP)
Max. tool weight kg #40-7、#50-15 (OP)
Max. tool length mm #40-300、#50-400
Others
(Below data are obtained when the machine is under well air conditioned and stable operating conditions)		 Chip removal method   Dual V sharped chip augers
Positioning accuracy / Repeatability mm 0.015 / 0.008、0.016 / 0.01
Power source required KVA 55~70
Air source required Mpa 0.65±10%
Machine weight kg 31

The series of machines can be equipped with 5 axes or 4 axes simultaneous controller (Fanuc. Siemens, Heidenhain)
As the machine manufacturer continuously conducts research and innovation on the machine structure and specifications, the above specifications are subject to change without prior notice.

Related Products