HK-LV650 / HK-LV850

X-axis travel: 800 mm

Y-axis travel: 530 mm

Z-axis travel: 560 mm (OP:760 mm)

Spindle taper: BBT40 (Taper Dual Contact)

Spindle speed: BBT40 12000 rpm direct drive

Spindle transmission (cont. /30 min): 7.5/11 kw (OP: 11/15 kw)

Product Specification

		UNIT	HK-LV650	HK-LV850
FANUC Oi-MF PLUS Controller
TABLE	Table Size	mm	700 x 500	900 x 550
	T-Slot (No. x Width x Pitch)	mm	5 x 18 x 100
	Max. Table Load	kg	400	500
TRAVEL	X Axis	mm	610	800
	Y Axis	mm	500	530
	Z Axis	mm	510	560 (710)
	Spindle Nose to Table Surface	mm	100-610	120-680 (830)
	Spindle Center to Column Cover	mm	577
SPINDLE	Spindle Taper		BBT (Taper Dual Contact)	BBT (Taper Dual Contact)
SPINDLE	Spindle Speed & Transmission	rpm	#40: 12000 direct drive (5.5/7.5 kW)	#40: 12000 direct drive (7.5/11 kW)
FEED	Rapid Feed Rate - X/Y/Z axis	m/min	40 / 40 / 40
FEED	Cutting Feed Rate - X/Y/Z axis	m/min	15 / 15 / 15
ATC	Tool Storage Capacity		#40: 24T
	Tool Shank Type		BBT40
	Max. Tool Diameter x Length	mm	#40: Ø75 x 250
	Without Adjacent Tool (diameter)	mm	Ø125
	Max. Tool Weight	kg	7
ACCURACY	ISO 230-2		A: 0.006 ; R: 0.005
	ISO 10791-2		A: 0.006 ; R: 0.005
	VDI 3441 (*1)		P: 0.008 / PS: 0.005
PERIPHERALS	Power Requirement	KVA	30
	Pneumatic Supply	Mpa, l/min	0.6
	Coolant Tank Capacity	L	365
	Footprint Size (W x D)	mm	2890 x 3160
	Machine Net Weight	kg	5350	6250

NOTE 1: The VDI 3441 employs a statistical method method by using 5 standard deviations, which can achieve a quality assurance level of 99.5%.
* As the machine manufacturer constantly conducts machine research and improvement, the machine specifications are subject to change without prior notice.
NOTE 2: HK-LV1377/1577/1677, if Y/Z-axis travel is changed to 700/680 mm, it can be packed into 40” HQ container.